mediatech-group.ru

Модель:

RUR 0

1. USB 3.0 interface can connect U disk, keyboard, mouse, game controller and other devices 2. USB 3.0 interface supports 5. Gbps fast transmission, stable and safe transmission 3. Plug and play, one end is connected to the mobile phone/tablet computer, and the other end is connected to the U disk, you can directly read documents or watch movies on the mobile phone/tablet computer, etc 4. Compatible with all mobile phones/tablets with OTG function and Micro USB port 5. Nylon braided wire, high quality and reliable Product parameters: 1. Function: transmission + charging 2. Bare metal weight: 12g 3. Line length: 17cm

Модель:

RUR 5190

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, Type-C, RJ-45, HDMI, SD, micro-SD), Серебристый Док-станция ST-TCMAS

Модель:

RUR 9690

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый Док-станция ST-TCMAM

Модель:

RUR 8990

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3, Type-C, RJ-45, HDMI, SD, micro-SD) Серебристый Док-станция ST-TCMA2S

Модель:

RUR 8990

Док-станция Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый ST-TCMA2M

Модель:

RUR 4190

USB-хаб Satechi Aluminum Thunderbolt 3 Pro Hub Adapter with Ethernet (2xUSB 3.0, USB Type-C, RJ-45, HDMI, micro-SD), Серый Док-станция ST-TCPHEM

Модель:

RUR 6990

Док-станция Satechi Type-C Slim Multiport with Ethernet Adapter (2xUSB 3.0, USB Type-C, HDMI, RJ-45, SD, micro-SD), Черный ST-UCSMA3K

Модель:

RUR 11990

USB-хаб Satechi USB4 Multiport Adapter with 8K HDMI (2xUSB 3.2, USB 2.0, Type-C, HDMI, RJ-45, Micro/SD, 3.5 mm), до 100 Вт, Серый космос ST-U4MA3M

Модель:

RUR 9990

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Черный Док-станция ST-P8KED

Модель:

RUR 9990

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Серый космос Док-станция ST-P8KEM

Модель:

RUR 34

Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly(OLED Material) for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. Note: supporting fingerprint identification

Модель:

RUR 25

Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for i. Phone 11 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Модель:

RUR 10

About the product 1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J7 (2017)/J7 Pro J730F/DS, J730FM/DS,AT&T; 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

Модель:

RUR 60

About the product 1. Replacement LCD screen + touch screen digitizer assembly for Microsoft surface pro 7 1866 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

Модель:

RUR 13

Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD screen + touch screen digitizer assembly for i. Phone SE 2020 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Модель:

RUR 11

Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for Samsung Galaxy A50 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed